Step double layer Glazed Tile Roll Forming Machine with HMI PLC Control

Minimum Order Quantity:	1 set
Price:	$13500-18500/set
Packaging Details:	Packed in plastic film cover
Delivery Time:	35 working days after received your payment
Payment Terms:	T / T or western Union, L/C
Supply Ability:	120 sets per month

Contact Now

Detailed Product Description

Encoder Brand:	Omron	PLC Brand:	Delta Or Panasonic
Feedig Width:	1200mm	Forming Stations:	16
Warranty:	2 Year	Speed:	2-3m/min
Hydraulic Devices:	Pressing And Cutting
High Light:	roof tile roll forming machine , roof tiles making machine

Step double layer Glazed Tile Roll Forming Machine with HMI PLC Control

1. Description:

- Entered order length up to 10 sizes with 10 quantities different.

- View the numbering of current order.

- View the quantity of sheet was done on each order.

- View the current length of the sheet inside machine (counting from profile shear).

- Available reset length to "zero" with any possition of the sheet.

- Adjustable the variation length of the sheet on screen directly in "PARAMETER" page.

- Adjustable the roll forming speed on screen directly in "PARAMETER" page.

- In "TEST" mode, all motion FWD/REV of roll forming, UP/DOWN of Profile/Flat shear are controlled by handle remote.

- Inverter drive with automatic multi speed when stop and start.

- Automatically roll forming, and cutting at any length.

- The control panel enables to count a total length of was done coil.

- Signal feedback from encoder showing existing length of product.

- Automatically alarm to pre-cutting before the order finished.

Profile

2. Flow chart

Step double layer Glazed Tile Roll Forming Machine with HMI PLC Control

3. Specification

NO.	ITEM		PARAMETER	NOTE
1.	Suitable material	Type	Pre-painted sheet, Galvanized sheet Galvanized Aluminum
		Width(mm)	1200mm
		Thickness(mm)	0.3-0.8mm
		Yield stress(mm)	Q235
2.	Product specifications	Detail as the attached file
2.	Product specifications	Length	Any length
3.	Power requirement	Type	380v/3ph/50hz	Motor brand shanghai Lichao
		Main Motor power	5.5kw
		Cutter power	4kw
4.	Forming speed(m/min)		2-3m/min	Not include the time of cutting
5.	Manual Decoiler (Optional)	Type	Manual
		Max capacity	5t
		Suitable coil OD(MM)	1200
		Suitable coil ID(MM)	508
6.	Forming stand		16	Depend on actual design
7.	Thickness of structure		16mm
8.	Forming shaft diameter(mm)		70 solid
9.	Type of cutting		Roll formed and length-set cutting
10.	Control system		Panasonic PLC and inverter
11.	Install dimension(depend on the final design)		8.2m×1.5m×1.2m	Without panel length
12.	Total weight (Approx)		5.1T	Depend on final design