Home ProductsStud And Track Roll Forming Machine

PPGI Cold roll Former Metal Stud Roll Forming Machine For T Grid Ceiling Beam

PPGI Cold roll Former Metal Stud Roll Forming Machine For T Grid Ceiling Beam

    • PPGI Cold roll Former Metal Stud Roll Forming Machine For T Grid Ceiling Beam
    • PPGI Cold roll Former Metal Stud Roll Forming Machine For T Grid Ceiling Beam
    • PPGI Cold roll Former Metal Stud Roll Forming Machine For T Grid Ceiling Beam
    • PPGI Cold roll Former Metal Stud Roll Forming Machine For T Grid Ceiling Beam
  • PPGI Cold roll Former Metal Stud Roll Forming Machine For T Grid Ceiling Beam

    Product Details:

    Place of Origin: China
    Brand Name: ZhongHeng
    Certification: CE/SGS/ISO9001
    Model Number: ZH

    Payment & Shipping Terms:

    Minimum Order Quantity: 1 set
    Price: $12500-18000/set
    Packaging Details: packaged by waterproof film cover
    Delivery Time: 30 working days
    Supply Ability: 80 sets/months
    Contact Now
    Detailed Product Description
    Material: G.I. Coil. PPGI Coil PPGI Tickness: 0.2mm-0.23mm
    GI Tickness: 0.24 Mm - 0.2mm Hole Punching: 26 Holes
    Control System: PLC And Inverter Cutting Edge: 2
    Joint Holes: 24 Speed: 3 Pieces * 3600mm / Min

    PPGI Cold roll Former Metal Stud Roll Forming Machine For T Grid Ceiling Beam

    PPGI Cold roll Former Metal Stud Roll Forming Machine For T Grid Ceiling Beam

    Components of line

     

    NO

    Name

    Unit

    Qty

     

    1

    Man-made decoiler

    set

    2

    • Max width 300mm
    • Inner diameter -460-510mm
    • Max loading capacity 1000kg
    • Manual operating type manual expansion to tighten the coil
    • Break down drive whole line stop while decoiler idle

    2

    Feeding Table

    set

    1

     

    3.

    Forming Rollers

    set

    1

    • Forming Station 16 nos
    • Forming Rollers material Cr12
    • Forming Rollers hard treatment HRC 58-60
    • Shaft of roller Diameter 40mm
    • Shaft material 40Cr,heat treatment, refine grinded
    • Machine frame: steel welding
    • Main sidewall thickness 25mm
    • Machine driven by universal joints via gearbox
    • Roll forming motor 5.5kw with frequency inverter controller
    • Gearbox RV  worm gearbox

    4.

    Hydraulic cutting with hole punching

    set

    1

    • Hydraulic pump stand 1 set
    • Hydraulic Components taiwanese
    • Hydraulic System discharging protection with wind cooler
    • Edge cutting 2 sets both ends
    • Middle joint hole punching  23sets/152.4mm
    • Fire testing hole  2 sets both ends
    • Mould standard SKD-11 Steel Japanese
    • Mould frame&plate S45C
    • Mould pin SKH-9 steel Japanese
    • All mould treatment  By slow-feeding Nc wire cutting

    5.

    Profile Discharger

    set

    1

    • Driven  machinical Auto Head
    • Operation Full automatic along with forming machine

    6.

    Electric Control system

    set

    1

    • Frequency converter Silin ,Taiwanese
    • PLC Fatek ,Taiwanese
    • Touch screen weinview Taiwanese
    • Profile length cutting forming machine stops then cut
    • Operational controller: touch screen knob switch emg

    Brake down and so on

    (6)Power supplier  380V 50Hz 3phase

    Applications:

    1.   Any small problems will be solved at the most prompt time.

    2.  We always offer relateive technical support,quick response,all your inquire will replied within 24 hours.

    3.  We can delivery your goods within 25 workdays.

    4.   OEM service.

     

    Competitive Advantage:

     

    1 This production line is full automatic-------could save working time and reduce the cost.

     

    2 New----------new developed automatic Grid production line in China

     

    3. Ceiling mould is perfect------------could use 10 years or long

     

    4. Price --------------is reasonable (welcome you send mail for asking the price)

     

    5. Technic support------------10 years technican give you strong and timely support

     

     

    FAQ

    1. Q: What is the MOQ?

         A:  1 set.

    2.  Q: What is the Delivery time?

         A: Within 25 workdays.

    3.  Q: What is the Payment terms you can accept?

         A: T/T or L/C.30% deposit,and before shipped we hope to receive the balance 70%.Also 100% L/C is accepted.

    4.  Q: What is the Warranty?

         A: Within 12 mounts,all of the technical personnel are ready to serve you at any time. 

     

    Contact Details
    ZhongHeng Machine Manufacture Co.,Ltd

    Contact Person: Ms. Shirly

    Tel: 86--15133711731

    Send your inquiry directly to us (0 / 3000)

    Other Products